Eksempler på almindelige problemer med sprængmaske

Gennem vores tidligere forståelse og dybdegående forståelse afsprængning maskine, there will still be some novices who do not fully understand the sprængning maskine. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the sprængning maskine, etc., I hope you will learn something and strengthen your own practical deficiencies.
1. Ser påsprængning maskinefra et professionelt synspunkt, hvilken slags maskine er det? Hvordan vælger jeg et støberiproduktions- og forarbejdningsanlæg?

The sprængning maskine itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a sprængning maskine. Secondly, considering the price, because there are more sprængning maskines in the market, you can choose to shop around. Only then can there be price comparisons.

2. Hvad er de tekniske krav til sprængning af skud? Hvad er de vigtigste aspekter?

Et punkt er problemet medsprængning maskine itself. On the basis of shot blasting technology, the sprængning maskine must be stable enough, and what kind of sprængning maskine is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the sprængning maskine misses the shot? How to solve it?
Hvissprængning maskine is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the sprængning maskine. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of sprængning maskines, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.